EE-5002 1M

Photomicrosensor (Transmissive) EE-SX3162/3163/3164-P Series EE-SX4162/4163/4164-P Series EE-5002 1M Slot / Connector Type • Photo IC output (Dark-ON / Light ON) • Connector with strong lock manufactured by JST. Mates with GHR-03. • Mounted with M2 screws • Models available for 5-V or 12-V power supply. • Zener diode mounted for greater noise immunity (EE-SX3162-P1-Z and EE-SX4162-P1-Z only). • Connector with cable (Order Separately) is available. EE-5002 1M (Refer to page 5.) Be sure to read Safety Precautions on page 3. Features Models with Connectors Eliminate the Need for a Separate PCB All-in-One Structure Facilitates Downsizing Models Available for Mounting on X, Y, and Z Axes Models with connectors are available with different mounting directions. Axis Z Photomicro sensor No PCB designing! Enables downsizing! Axis X Control PCB Axis Y Application Office Automation Equipment (Copier, Printer) Amusement Equipment Home Appliances (Air Cleaner) Vending Machine, ATM 1 EE-SX3162/3163/3164-P Series EE-SX4162/4163/4164-P Series EE-5002 1M Ordering Information Photomicrosensor Sensing method Appearance Connecting method Sensing distance Aperture size (H × W) (mm) Output type Power supply voltage Output configuration Dark-ON Side mounting 12 VDC 16 Light-ON 14 13 5 VDC L-shaped mounting Transmissive (slot type) Connector Emitter 1.4 x 1.4 5 mm Photo IC (Slot width) Detector 1.4 x 0.5 14.7 13.3 12 VDC 5 VDC 13.6 Horizontal mounting 12 VDC 14 5 VDC 8.3 22.6 Model EE-SX3162-P1 EE-SX3162-P1-Z EE-SX4162-P1 EE-SX4162-P1-Z Dark-ON EE-SX3162-P2 Light-ON EE-SX4162-P2 Dark-ON EE-SX3163-P1 Light-ON EE-SX4163-P1 Dark-ON EE-SX3163-P2 Light-ON EE-SX4163-P2 Dark-ON EE-SX3164-P1 Light-ON EE-SX4164-P1 Dark-ON EE-SX3164-P2 Light-ON EE-SX4164-P2 Ratings, Characteristics and Exterior Specifications Electrical and Optical Characteristics Absolute Maximum Ratings (Ta = 25°C) (Ta = 25°C) Rated value Item Symbol Power supply voltage VCC Output voltage VOUT Output current IOUT Permissible output dissipation POUT Operating temperature Topr Storage temperature Tstg EE-SX3162-P1 EE-SX3162-P1-Z EE-SX3163-P1 EE-SX3164-P1 EE-SX4162-P1 EE-SX4162-P1-Z EE-SX4163-P1 EE-SX4164-P1 EE-SX3162-P2 EE-SX3163-P2 EE-SX3164-P2 EE-SX4162-P2 EE-SX4163-P2 EE-SX4164-P2 13.2 DC 5.5 DC Unit Item — 13.2 V — 16 mA — mW -20 to +85 -30 to +85 —* °C —* °C * — * Even if the specified conditions are met, perform derating of the voltage and current as required by the temperature rating diagram. Also, do not expose the product to freezing or condensation. Exterior Specifications Appearance Side mounting EE-SX3162-P1 EE-SX3162-P1-Z EE-SX4162-P1 EE-SX4162-P1-Z EE-SX3162-P2 EE-SX4162-P2 Item Connecting method Weight Case Material Emitter and receiver sections L-shaped mounting EE-SX3163-P1 EE-SX4163-P1 EE-SX3163-P2 EE-SX4163-P2 Horizontal mounting EE-SX3164-P1 EE-SX4164-P1 EE-SX3164-P2 EE-SX4164-P2 Approx.1.4 g 5 VDC model DarkON EE-SX3162-P1 EE-SX3162-P1-Z EE-SX3163-P1 EE-SX3164-P1 EE-SX3162-P2 EE-SX3163-P2 EE-SX3164-P2 LightON EE-SX4162-P1 EE-SX4162-P1-Z EE-SX4163-P1 EE-SX4164-P1 EE-SX4162-P2 EE-SX4163-P2 EE-SX4164-P2 Power supply voltage VCC 10.8 to 13.2VDC Current consumption ICC 25 mA max. (With and without incident) Low-level output voltage VOL 0.3 V max. (IOUT=16 mA) (Dark-ON: without incident, Light-ON: with incident) High-level output voltage VOH (VCC×0.9 V max. (VOUT=VCC, RL=47 kΩ)) (Dark-ON: with incident, Light-ON: without incident) Response frequency f 4.5 to 5.5 VDC 3 kHz min. (VOUT=VCC, IOUT=16 mA *1) 1 kHz min. (VOUT=VCC, IOUT=16 mA *1,*2) *1. The value of the response frequency is measured by rotating the disk as shown below. Disk 2.1 mm 0.5 mm 0.5 mm *2. Only with models ending in -Z. Connector Approx. 1.2 g 12 VDC model Remarks V 80 Rated value Symbol Approx. 1.1 g Polybutylene terephthalate (PBT) Polyphenylene sulfide (PPS) 2 EE-SX3162/3163/3164-P Series EE-SX4162/4163/4164-P Series EE-5002 1M Engineering Data (Reference value) Fig 1. Output Allowable Dissipation vs. Ambient Temperature Characteristics Fig 2. Sensing Position Characteristics Fig 3. Sensing Position Characteristics (Typical) (Typical) 100 VCC = 12 V Ta = 25°C RL = 47 kΩ d2 = 0±0.7 mm VCC = 12 V Ta = 25°C RL = 47 kΩ 80 40 ( ) OFF (Center of axis) d 20 Light interrupting plate OFF (ON) 0 Output OFF (High) d1 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature Ta (°C) -3 -2 -1 0 1 2 3 Distance d (mm) d2 Output transistor ON 60 Output transistor Output allowable dissipation Pout (mW) d1 = 0±0.3 mm (Center of axis) d Output ON (Low) -3 -2 -1 0 1 2 3 Distance d (mm) Safety Precautions To ensure safe operation, be sure to read and follow the Instruction Manual provided with the Sensor. CAUTION This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. Dispose of this product as industrial waste. Precautions for Safe Use Do not use the product with a voltage or current that exceeds the rated range. Applying a voltage or current that is higher than the rated range may result in explosion or fire. Do not miswire such as the polarity of the power supply voltage. Otherwise the product may be damaged or it may burn. Do not short-circuit the load. Otherwise explosion or burning may occur. This product does not resist water. Do not use the product in places where water or oil may be sprayed onto the product. 3 EE-SX3162/3163/3164-P Series EE-SX4162/4163/4164-P Series EE-5002 1M Dimensions and Internal Circuit (Unit: mm) Photomicrosensor EE-SX3162-P1 EE-SX3162-P1-Z EE-SX4162-P1 EE-SX4162-P1-Z EE-SX3162-P2 EE-SX4162-P2 2 16 11 8.3 5.6 Marked surface (brand, model number, and lot) 13 5 4.5 2.7 Optical axis A 6.4 7.5 8.3 2.5 5 Aperture width 0.5 (4.5) 6 1.4 11.6 (14) 2-R1.55 2.5 dia. A (7) Cross section view A-A (Detector side) Aperture size (H × W) Emitter Detector 1.4 × 1.4 1.4 × 0.5 Manufactured by JST Recommended Mating Connectors: JST (Japan Solderless Terminal) GHR-03 Unless otherwise specified, the tolerances are as shown below. (3) (2) (1) Internal Circuit Dimensions Terminal No. Tolerance Name 3 mm max. ±0.2 3 < mm ≤ 6 ±0.24 V V (1) Ground (GND) O O (2) Output (OUT) 6 < mm ≤ 10 ±0.29 Power supply (VCC) 10 < mm ≤ 18 ±0.35 18 < mm ≤ 30 ±0.42 (3) G G Note: Only with models ending in -Z. EE-SX3163-P1 EE-SX4163-P1 EE-SX3163-P2 EE-SX4163-P2 Note: Dimensions in parentheses are for reference only. 7.5 2-R1.55 2.5 dia. 2.5 (6.65) 5 13.6 12.4 5 8.3 5.6 2.7 2.7 Optical axis A Aperture size (H × W) Emitter 1.4 × 1.4 8.4 Marked surface (brand, model number, and lot) Aperture width 0.5 1.4 7.5 6.4 (13.2) Detector 6.3 2.4 1.4 × 0.5 A Manufactured by JST (3) (2) (1) Recommended Mating Connectors: JST (Japan Solderless Terminal) GHR-03 Internal Circuit V O G Terminal No. Name (1) Ground (GND) (2) Output (OUT) (3) Power supply (VCC) Cross section view A-A (Detector side) Unless otherwise specified, the tolerances are as shown below. Dimensions Tolerance 3 mm max. ±0.2 3 < mm ≤ 6 ±0.24 6 < mm ≤ 10 ±0.29 10 < mm ≤ 18 ±0.35 18 < mm ≤ 30 ±0.42 Note: Dimensions in parentheses are for reference only. 4 EE-SX3162/3163/3164-P Series EE-SX4162/4163/4164-P Series EE-5002 1M EE-SX3164-P1 EE-SX4164-P1 EE-SX3164-P2 EE-SX4164-P2 2 (4.15) 12.6 8.3 5.6 2.7 Optical axis 5 Marked surface (brand, model number, and lot) 2.7 Aperture width 0.5 A 1.4 6.4 8.4 7.5 Aperture size (H × W) Emitter 1.4 × 1.4 2.5 11.6 (14) 5 (8.5) 10 A Detector (7) 2.5 dia. 1.4 × 0.5 Cross section view A-A (Detector side) 2-R1.55 17.6 22.6 (1) (2) (3) Recommended Mating Connectors: JST (Japan Solderless Terminal) GHR-03 Manufactured by JST Unless otherwise specified, the tolerances are as shown below. Internal Circuit V Terminal No. Name Dimensions O (1) Ground (GND) 3 mm max. ±0.2 (2) Output (OUT) 3 < mm ≤ 6 ±0.24 (3) Power supply (VCC) G Tolerance 6 < mm ≤ 10 ±0.29 10 < mm ≤ 18 ±0.35 18 < mm ≤ 30 ±0.42 Note: Dimensions in parentheses are for reference only. Connector with cable (Order Separately) EE-5002 1M No. (1) (2) Name Connector, HS for 101-150 harness Connector, CT for 101-150 harness 1,000 ±10 (3) 3 ±0.5 3 2 1 (1) (2) (3) Lead wires Model/ Specifications Quantity Manufacturer GHR-03V-S 1 JST SSHL-002TP0.2 3 JST UL1061 AWG26 3 — Wiring Connector circuit number 1 2 3 Lead-wire color Blue Black Brown 5 • Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product. • Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or equipment, and be sure to provide the system or equipment with double safety mechanisms. Note: Do not use this document to operate the Unit. OMRON Corporation Electronic and Mechanical Components Company Contact: www.omron.com/ecb Cat. No. E460-E1-04 1217(1016)(O)